Ole's Machine

Skidoo Accessories

Skidoo Top clamps

   #TCS7S      Standard Top Clamp Stock 7/8 Bar                   Qty: $26.95
   #TCCE7S   Custom Engraved Top Clamp Stock 7/8 Bar    Qty: $36.95
   These Top Clamps can be put on any setup with stock 7/8 Bars
                      You will have to call or email me with your engraving ideas for #TCCE7S top clamp
                      These top clamps are optional with any 7/8" bar riser

Skidoo 6 hole plate

   #12PLS     Skidoo 6 hole plate with no hardware    Qty: $11.95
   #12PL9S   Skidoo 6 hole plate with hardware         Qty: $14.95
   With the purchase of #12PLS and a riser you will get no hardware for the plate
                      With the purchase of #12PL9S and a riser you will get the associated hardware for that plate and riser
                      This 6 hole plate is optional with any riser

Skidoo adaptor plate for 1999 & older sleds

#ADPLS Skidoo adaptor plate Qty: $5.00 This plate is needed for 1999 & older sleds with the cup shaped top plate on steering shaft

Skidoo Risers

Skidoo 30 degree Riser for all with hardware

2" Skidoo Riser
#20304S 2" 30° riser 7/8 bar 1/4" steel hardware Qty: $35.95
#20304SS 2" 30° riser 7/8 bar 1/4" stainless steel hardware Qty: $39.95

3" Skidoo Riser
#30304S 3" 30° riser 7/8 bar 1/4" steel hardware Qty: $40.95
#30304SS 3" 30° riser 7/8 bar 1/4" stainless steel hardware Qty: $44.95

4" Skidoo Riser
   #40304S     4" 30° riser 7/8 bar 1/4" steel hardware                    Qty: $45.95
   #40304SS   4" 30° riser 7/8 bar 1/4" stainless steel hardware    Qty: $49.95

   #40305SS18   4" 30° 1-1/8 bar 5/16" stainless steel hardware    Qty: $85.95
                      The 40305SS18 is for 1-1/8 bars and comes with a Custom Engraved Top Clamp
                      You will have to call or email me with your engraving ideas for the top clamp
                      The 1-1/8 bar riser is only avalable with 5/16" hardware and requires drilling out the holes on top of the steering shaft

5" Skidoo Riser
   #50305SS       5" 30°    7/8 bar   5/16" stainless steel hardware    Qty: $54.95
   #50305SS18   5" 30° 1-1/8 bar 5/16" stainless steel hardware    Qty: $90.95
   The 50305SS18 is for 1-1/8 bars and comes with a Custom Engraved Top Clamp
                      You will have to call or email me with your engraving ideas for the top clamp
                      These 5" bar risers are only avalable with 5/16" hardware and requires drilling out the holes on top of the steering shaft

6" Skidoo Riser
   #60305SS       6" 30°    7/8 bar   5/16" stainless steel hardware    Qty: $59.95
   #60305SS18   6" 30° 1-1/8 bar 5/16" stainless steel hardware    Qty: $95.95
   The 60305SS18 is for 1-1/8 bars and comes with a Custom Engraved Top Clamp
                      You will have to call or email me with your engraving ideas for the top clamp
                      These 6" bar risers are only avalable with 5/16" hardware and requires drilling out the holes on top of the steering shaft

8" Skidoo Riser
   #80305SS       8" 30°    7/8 bar   5/16" stainless steel hardware    Qty: $72.95
   #80305SS18   8" 30° 1-1/8 bar 5/16" stainless steel hardware    Qty: $108.95
   The 80305SS18 is for 1-1/8 bars and comes with a Custom Engraved Top Clamp
                      You will have to call or email me with your engraving ideas for the top clamp
                      These 8" bar risers are only avalable with 5/16" hardware and requires drilling out the holes on top of the steering shaft

top

unique visitor counter