Ole's Machine

Yamaha Accessories

Yamaha Top clamps

   #TCS7Y      Standard Top Clamp Stock 7/8 Bar                   Qty: $26.95
   #TCCE7Y   Custom Engraved Top Clamp Stock 7/8 Bar    Qty: $36.95
   These Top Clamps can be put on any setup with stock 7/8 Bars
                      You will have to call or email me with your engraving ideas for #TCCE7Y top clamp
                      These top clamps are optional with any 7/8" bar riser

Yamaha 6 hole plate

   #12PLY     Yamaha 6 hole plate with no hardware    Qty: $11.95
   #12PL9Y   Yamaha 6 hole plate with hardware         Qty: $14.95
   With the purchase of #12PLY and a riser you will get no hardware for the plate
                      With the purchase of #12PL9Y and a riser you will get the associated hardware for that plate and riser
                      This 6 hole plate is optional with any riser

Yamaha Risers

Yamaha 30 degree Riser with all hardware

2" Yamaha Riser
#20309Y 2" 30° riser 7/8 bar with steel hardware Qty: $35.95
#20309YS 2" 30° riser 7/8 bar with stainless steel hardware Qty: $39.95

3" Yamaha Riser
#30309Y 3" 30° riser 7/8 bar with steel hardware Qty: $40.95
#30309YS 3" 30° riser 7/8 bar with stainless steel hardware Qty: $44.95

4" Yamaha Riser
   #40309Y     4" 30° riser 7/8 bar with steel hardware                     Qty: $45.95
   #40309YS   4" 30° riser 7/8 bar with stainless steel hardware     Qty: $49.95

   #40305YS18   4" 30° 1-1/8 bar  5/16"stainless steel hardware    Qty: $85.95
                      The 40305YS18 is for 1-1/8 bars and comes with a Custom Engraved Top Clamp
                      These 1-1/8 bar risers are only avalable with 5/16" hardware witch requires drilling out the holes on the top of the steering shaft
                      You will have to call or email me with your engraving ideas for the top clamp

5" Yamaha Riser
   #50305YS       5" 30°    7/8 bar   5/16" stainless steel hardware    Qty: $54.95
   #50305YS18   5" 30° 1-1/8 bar 5/16" stainless steel hardware    Qty: $90.95
   The 50305YS18 is for 1-1/8 bars and comes with a Custom Engraved Top Clamp
                      You will have to call or email me with your engraving ideas for the top clamp
                      These 5" bar risers are only avalable with 5/16" hardware and requires drilling out the holes on top of the steering shaft

6" Yamaha Riser
   #60305YS       6" 30°    7/8 bar   5/16" stainless steel hardware    Qty: $59.95
   #60305YS18   6" 30° 1-1/8 bar 5/16" stainless steel hardware    Qty: $95.95
   The 60305YS18 is for 1-1/8 bars and comes with a Custom Engraved Top Clamp
                      You will have to call or email me with your engraving ideas for the top clamp
                      These 6" bar risers are only avalable with 5/16" hardware and requires drilling out the holes on top of the steering shaft

8" Yamaha Riser
   #80305YS       8" 30°    7/8 bar   5/16" stainless steel hardware    Qty: $72.95
   #80305YS18   8" 30° 1-1/8 bar 5/16" stainless steel hardware    Qty: $108.95
   The 80305YS18 is for 1-1/8 bars and comes with a Custom Engraved Top Clamp
                      You will have to call or email me with your engraving ideas for the top clamp
                      These 8" bar risers are only avalable with 5/16" hardware and requires drilling out the holes on top of the steering shaft

top

unique visitor counter